CANBUS Output Yaw Dynamic Inclinometer for Engineering Vehicle
▶ TECHNICAL PARAMETERS
HDA436T | CONDITION | INDEX |
Measure range |
Roll ± 180 °, pitch ± 90 °, azimuth ± 180 ° (initial value at power-down is 0 °) |
|
Measure axis | X axis / Y axis / Z axis | |
Resolution | 0.01° | |
Static accuracy (RMS) | @25℃ | ± 0.05° |
Dynamic accuracy (RMS) | @25℃ | ± 0.1° |
Bias Instability (Allan) | 8°/h | |
Zero point temp. coefficient | -40~85℃ | ±0.01°/℃ |
Sensitivity temp. coefficient | -40~85℃ | ≤100ppm/℃ |
Power-on startup time | 1S | |
Response time | 0.01S | |
Output signal | CAN2.0A/CAN2.0B | |
Electromagnetic compatibility | According to EN61000 and GBT17626 | |
MTBF | ≥ 50000 hours / time | |
Insulation resistance | ≥100 Megohm | |
Impact resistance | 100g @ 11ms, 3 axial direction (half sinusoid) | |
Anti-vibration | 10grms,10~1000Hz | |
Waterproof level | IP67 | |
Cable | Standard without wiring, optional 2m M12 aviation plug with PVC unshielded cable | |
Weight | Single connector 152g / double connector 166g (Without cable) |
▶ ELECTRICAL PARAMETERS
PARAMETER | CONDITION | MIN | TYP | MAX | UNIT |
Supply voltage | standard | 9 | 12,24 | 36 | V |
Working current | without load | 60mA(12V) | mA | ||
Operating temp | -40 | +85 | ℃ | ||
storage temp | -40 | +85 | ℃ |
▶ KEY FEATURES
★ Range (Roll angle ± 180 °, pitch angle ± 90 °, azimuth angle ± 180 °) ★ Dynamic accuracy: ± 0.1 ° ★ DC 9~36V wide voltage input ★ Wide temperature operation -40~+ 85 ℃
★ Resolution 0.01 ° ★ IP67 protection level
★ High anti-vibration performance> 2000g ★ Size: L72×47× H22.5mm
▶ PRODUCT APPLICATION
★ Railway locomotive monitoring ★ Oil drilling equipment
★ Shield pipe jacking application ★ Geological equipment tilt monitoring
★ Shield pipe jacking application ★ Ship navigation attitude measurement
★ Underground drilling rig attitude navigation ★ Satellite communication vehicle attitude detection
★ Orientation measurement based on inclination angle
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.