Highlight:
Single Axis Analog Inclinometer Sensor
, Solar Tracking System Analog Inclinometer Sensor
, Pitch Roll Tilt Sensor Inclinometer
Single Axis Analog Inclinometer Sensor Pitch Roll Sensor For Solar Tracking System
Single Axis Analog Inclinometer Sensor Current Output Pitch Roll Sensor Meter Tilt Clinometer For Solar Tracking System
▶ APPLICATION
★ Equipment vehicle leveling
★ Bridge and Dam monitoring
★ High-altitude platform safety protection
★ Angle control of medical equipment
★ Attitude navigation of underground drilling rig
★ Leveling of railway gauge and gauge
★ Direction measurement based on tilt angle
★ Tilt monitoring of geological equipment
★ Mining machinery, oil drilling equipment
★ Equipment level control
★ Alignment control , curve control
★ Pitch angle measurement of directional satellite communication antenna
▶ TECHNICAL DATA
| HCA510T |
CONDITION |
PARAMETERS |
UNIT |
| Measure range |
|
±10 |
±30 |
° |
| Zero output |
0° output |
2.5 |
2.5 |
V |
| Measure axis |
|
X / Y |
X / Y |
AXIS |
| Resolution |
|
0.001 |
0.001 |
° |
| Measure accuracy |
@25℃ |
0.005 |
0.01 |
° |
| Zero Temp.coefficient |
-40～85℃ |
±0.0005 |
±0.0008 |
°/℃ |
| Sensitivity temp-coeffi |
-40～85℃ |
≤100 |
≤100 |
ppm/℃ |
| Power on time |
|
0.5 |
0.5 |
S |
| Response time |
|
0.02 |
0.02 |
s |
| Response frequency |
20Hz |
| output signal |
0~5V |
| EMC |
According to EN61000 and GBT17626 |
| MTBF |
≥50000hours/times |
| Insulation Resistance |
≥100MΩ |
| Shockproof |
100g@11ms,3 Axial Direction (Half Sinusoid) |
| Anti-vibration |
10grms,10～1000Hz |
| Protection grade |
IP67 |
| Cables |
Standard 1 meter length, wear-resistant, wide temperature, shielded cable 4 * 0.4mm2 aviation connector |
| Weight |
190g(without cable) |
* This parameter only list ± 10 °, ± 30 ° series for reference. For other measurement ranges, please refer to the nearest neighbor parameter.
▶ FEATURES
★ Single / dual axis inclination measurement
★ Range ± 1～± 90° optional
★ Accuracy: Refer to technical data
★ Wide voltage input 9～36V
★ Output mode 0～5V
★ Wide temperature operation -40 ℃～+ 85 ℃
★ IP67 protection
★ High vibration resistance> 2000g
★ High resolution 0.001 °
★ Small size L90 × W59 × H34mm
ELECTRICAL CONNECTION
SINGLE AXIS CABLE WIRE CONNECTION
| Wire Color function |
RED |
WHITE |
GREEN |
BLACK |
GRAY |
|
DC9~36V
Power supply positive
|
Out X
X axis output voltage
|
NC |
GND
Power negative
|
Signal ground |
GENERAL DESCRIPTION
The HCA510T/HCA520T-N is a high-precision analog voltage output single/dual-axis inclination sensor, achieving a maximum precision of 0.003°, making it one of the few high-precision inclinometers available in China. Its primary function is to measure the inclination of an object relative to a horizontal plane.
This sensor features a built-in micro solid pendulum that measures changes in the static gravity field and converts them into inclination changes, outputting a voltage signal (0-5V). It utilizes a high-resolution differential digital-to-analog converter and incorporates a secondary linearity and temperature correction via an internal MCU system, so users do not need to perform secondary linearity corrections. This also reduces the impact of environmental changes on the product's accuracy.
Employing a non-contact measurement principle, the HCA510T/HCA520T-N can provide real-time outputs of current posture inclination. It is easy to use and does not require reference surfaces for installation. With the latest MEMS technology, it offers high precision, compact size, strong resistance to external electromagnetic interference, and the ability to withstand shock and vibration, making it an ideal choice for industrial equipment and platform attitude measurement!
Your message must be between 20-3,000 characters!
