TG632D 60mA Three Axis Gyro Sensor 3 Axis Accelerometer Gyroscope Magnetometer

TG632D 60mA Three Axis Gyro Sensor 3 Axis Accelerometer Gyroscope Magnetometer

▶ KEY FEATURES

★ High performance drift stability

★ Low noise

★ Light weight

★ Long life,strong stability

★ Cost-effective

★ Excellent vibration performance

★ All solid state

★ Compact & light design

★ RS232/RS485/SPI output optional

★ Wide temp. range-40 ~+85℃

★ DC+9～36V power supply

★ Temperature drift< ±0.1°/sec/℃

▶ APPLICATION

★ Navigation

★ Car navigation
★ Platform stability

★ Auto safety system
★ Industrial control

★ Robot

★ 3D virtual reality

★ Equipments

★ GPS combination

★ Camera stability
★ Turck-mounted satellite antenna equipment

★ Ships electronic needle error compensation on inclined(angle rate)induction equipment

▶ GENERAL DESCRIPTION

TG632D is a gyroscope (angle rate sensor) based on the micro mechanical principle, a miniature inertial devices for mainly measuring the angular velocity of a moving object. Product internal with the silicon ultrafine precision ring sensing technology so that it has a high-performance, waterproof,anti-vibration, light weight, anti-electromagnetic interference characteristics and etc. Uninterrupted the machine with self-test technology, the filtering algorithm and the first time in the country by eliminating resonance technology to solve the influence on data because of the surrounding noise or vibration interference source to the ordinary gyroscope. TG632D add another international temperature sensor compensation technology to solve the temperature drift impact problems,with over-temperature stability and long life characteristics etc. to realize the domestic similar products technology-leading technology.

Products with high cost-effective, small volume , is now widely used in the automotive, marine, moving objects, position control & attitude control, and other applications that require precise angle measurement occasions !

Detailed Data

TG632D	parameter
Measuring range	±50°/s	±150°/s	±300°/s
Measuring axis	X,Y,Z(optional)
Bandwidth	>100Hz	>100Hz	>100Hz
Resolution	0.05°/s	0.1°/s	0.2°/s
Nonlinear	0.06% of FS	0.1% of FS	0.15% of FS
Temperature drift	< ±0.1°/sec,/℃	< ±2°/sec	< ±3°/sec
Start time	<1s
Input voltage	+9~36V
Current	60mA
Working temperature	-40~+85℃
Store temperature	-40~+85℃
Time Drift	8°/h
Shock	5g~10g
Impact	200g pk,2ms,½sine
Working life	11 years
Output rate	5Hz,15Hz,35Hz,50Hz can be set
Output signal	RS232/RS485/TTL
MTBF	≥50000 hours/times
Insulation resistance	≥100M
Shockproof	100g@11ms,3 Axial Direction (Half Sinusoid)
Anti-vibration	10grms,10～1000Hz
Protection class	IP67
Connector	4 pins with 1M cable
Weight	152g(standard cable)

 

 

 

Dimension

 

 

 

 Notice.

1.The angular gyro sensor should be mounted in the center position of the measured object , in order to reduce the influence of linear acceleration on the measurement accuracy. See below diagram as ref. 

2. The installation of the instrument should be kept parallel to the surface of the measured object, and reduce the influence of the dynamic and acceleration on the angle meter. Incorrect installation will lead to measurement errors, with particular attention to "surface" and" line "

1)The mounting surface of the instrument fixing must be close, smooth and stable with the measured surface. If the mounting surface is not smooth, the angle error of angle measurement can be caused easily. See figure Pic.AB

2)The axis of the instrument must be parallel to the axis of measurement, and the two axis should not be included angle as far as possible , see figure Pic.CD

 

3. Do not shake violently during the use of the product, avoid violent vibration, away from the vibration source (if you can not avoid please install the shock absorber), so as not to affect the product measurement accuracy;

4. Try to avoid a sharp acceleration, arrest, sharp turn angular velocity greater than 300 DEG /s movement during use, so as not to affect the measurement precision of products.

FAQ

 

Q1. What is your terms of packing?

A: Generally, we pack our goods in brown cartons. If you have legally registered patent,

we can pack the goods in your branded boxes after getting your authorization letters.


Q2. What is your terms of payment?

A: T/T 40% as deposit, and 60% before delivery. We'll show you the photos of the products and packages

before you pay the balance.


Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?

A: Generally, it will take 3 to 10 days after receiving your advance payment. The specific delivery time depends

on the items and the quantity and stock of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and

the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;