Four Ways Inclinometer Switch X Y Axis IP67 Tilt Alarm Sensor With Buzzer

Technical Data

SCA140T is a four-axis dip switch (four directions switch,dip over switch, tilt switch,inclinometer switch)which is researched and produced by Shenzhen RION with high accuracy and high stability ,Its Measuring range is±85°, Four directions will output four switching signal (-x,+x,-y,+y),The switch action points and trigger delay time can be output and set through the RS232  serial communication port. It has ZERO setting function and response frequency adjustment function as well as optional Baud rate. It can be widely used in engineering mechanism field.

Features: 

Dual-axis with 4 directions tilt measurement

Accuracy:please refer to the technical data           

RS232 series output

Relay output(high-low level)

Resolution : 0.01°

Wide temperature working:  -40~+85°C

IP67 protection class

Highly anti-vibration performance>2000g

Direct lead cable interface

Customer can set alarm angle value by himself 

With Setting 0° function

Positive/negative direction output is optional

DC 9~36V wide voltage input        

Application:

Bank angle warning system for ride-on mowers
Safety cut-out for cranes with hydraulic levelling
Tilt warning system for platform and hoist levelling
Rollover warning system for agricultural vehicles
Safety cut-out for telescopic and scissor lifts

SCA141&SCA142	CONDITIONS	PARAMETERS	UNIT
Measure rang		±15	°
Measure axis		X Y	Axis
Resolution		0.01	°
Measure accuracy		0.05	°
Long term stability		0.05	°
Zero Temp. coefficient	-40～85℃	±0.006	°/℃
Sensitivity temp. coefficient	-40～85℃	≤100	ppm/℃
Power on time		0.1	S
Response time		0.2	s
EMC	According to EN61000 and GBT17626
MTBF	≥50000 hours/times
Insulation Resistance	≥100M
Shockproof	100g @ 11ms,3 axial direction (half sinusoid)
Anti-vibration	10grms,10～1000Hz
Protection glass	IP67
Cables	Standard 1M length/wearproof/grease proofing/wide temp./Shielded cables 4*0.4mm2
Weight	120g(without cable)