Solar tracking tilt sensors PV tilt sensor inclinometer for solar tracking
General Description
MCA426M is a MODBUS output inclinometer designed especially for industrial position control. It adopts RS485 hardware differential bus transmit data. It built-in high accuracy 12 bit A/D differential conventor, using third order filter algorithm to measure the pitch and roll angle relate to horizontal level. It could redress the temperature drift according to the inside temperature change because of the built-in ADI company's high accuracy digital temperature sensor, ensuring the high repeatability when it is under high and low temperature. The output respond frequency could reach 20Hz, high frequency could be customized.
Feature
●singl axis
●measuring range ±180°
●accuracy:±0.3°
●DC 9~36V input
●working temp-40~+85℃
●resolution: 0.1°
●IP67
●anti-shock>2000g
●direct lead interface
▶ PARAMETERS
MCA416L | CONDITION | INDEX | UNIT |
Measure range | / | ±80 | ° |
Measure axis | / | Single axis(Y axis) | axis |
Resolution | / | 0.1 | ° |
Absolute accuracy | @25℃ | 0.3 | ° |
Zero temp. coefficient | -40~85° | ±0.4 | °/℃ |
Output Interface | RS485 | ||
communication protocol | MODBUS | ||
EMC | According to EN61000 and GBT17626 | ||
MTBF | ≥50000 hour/time | ||
Insulation resistance | ≥100 megohm | ||
Anti-impact | 100g@11ms,three axes direction(half sinusoid) | ||
Anti-vibration | 10grms,10~1000Hz | ||
Waterproof grade | IP67 | ||
Housing material | Sand-grinding oxidation of aluminum alloy | ||
Screw | Three M4 screws | ||
Cable | Standard 1-meter length, anti-ultraviolet, shielded cable 4*0.4mm2 | ||
Weight | 60g (exclude cable) |
Project