Hcm605b Digital Compass Sensor Dynamic 3 Axis Electronic For Antenna Servo Control

▶ FEATURE

★ Heading Accuracy: 0.3°～0.5°

★ Roll Range:±180°

★ Tilt Resolution: 0.1°

★ Tilt Accuracy: <0.2°(Full Range)

★ Wide Temp.Range: -40℃～+85℃

★ Dimension: L110×W19.5×H19.5mm

★ With Hard-Soft Magnetic And Tilt Compensation

★ RS232/RS485/TTL

▶ APPLICATION

★ Satellite Antenna Search Satellite

★ Marine Navigation Surveying And Mapping

★ Gps Integrated Navigation

★ Antenna Servo Control

★ Infrared Imager

★ Laser Range Finder

★ Map For Plotter

★ Rov Underwater Robot Navigation

★ Oceanography Measurement Instruments

★ Special Occasion Robot

▶ PRODUCT INTRODUCTION

HCM600/HCM605 is a dynamic and high-precision 3 axis electronic compass, which integrates three-axis accelerometer, three-axis gyroscope and three-axis magnetic sensor. The roll angle, pitch angle, and heading angle data are dynamically calculated in real time through a 32bit high-speed processor. , it has three working modes: pure compass, 9-axis fusion mode and 9-axis fusion anti-jamming mode (anti-temporary-interference), using a three-axis accelerometer and a three-axis gyroscope to compensate heading angle error caused even by big tilt angle, and adopting hard iron and soft iron calibration algorithms, so that the roll angle can still provide a high-precision heading angle within the range of ±180°. It is long strip shape with width of only 1.95CM. with high performance, reliability, small size and low power consumption, it is suitable for measuring attitude and heading angles in many fields such as antenna stability and vehicles. User can order complete product with housing (up to IP67 waterproof level) or compass module.

HCM600B/HCM605B parameters
heading	Heading accuracy	0.5° tilt<10°
	Resolution	0.1°
Tilt parameters	Pitch accuracy	0.1°<15°(measure range)
		0.1°<30°(measure range)
		0.1°<60°(measure range)
		0.2°<85°(measure range)
	Pitch range	±85°
	Roll accuracy	0.1°<15°(measure range)
		0.1°<30°(measure range)
		0.1°<60°(measure range)
		0.2°<180°(measure range)
	Roll range	±180°
	Resolution	0.1°
Calibration	Hard iron calibration	Yes
	Soft iron calibration	Yes
	Magnetic interference calibration	Rotate 360deg horizontally; vertical rotation(option)
Physical feature	Size	L111.5×W19.5×H19.5mm
	Weight	≤85g(exclude cable)
	RS232/RS485/TTL	5PIN quick plug connector
interface	Start delay	<50ms
	Max output speed	20Hz/s
	Communication speed	2400 to 115200baud (default 9600)
	Output format	Binary High-performance Protocol
Power	Power voltage	(default) DC+5V
	Current(max)	30mA
	Ideal mode	26mA
	Hibernate mode	TBD
Environment	Operating range	-40℃～+85℃
	Storage temperature	-40℃～+85℃
	Vibration resistance	100g
	Protection	IP67
Electromagnetic compatibility	According to EN61000 and GBT17626
MTBF	≥40000 hours/time
Insulation resistance	≥100mego-ohm
Impact resistant	100g11ms, 3 Axial Direction (Half Sinusoid)
Anti-Vibration	10grms, 10~1000Hz