LCA326 Digital Output Inclinometer Meter Sensor Low Price of Manufacturer
*adopts the non-contact measuring principle
*built-in MCU control system
*real-time output the current attitude angle
*simple to use
*It is a ideal choice for Industrial automation control and platform measuring attitude
*long-term working in the industry harsh environment.
*suitable for the static and slow changes dynamic measurement,
*not suitable for rapid changes dynamic measuring
LCA326Tseries products which launched by RION company is a new generation digital type small size MEMS inclinometer , Built-in two channel gravity tilt unit, by measuring the static gravity acceleration then convert into the inclination change. Thus can measure the inclinometer output relative to the horizontal tilt and pitch tilt. Output RS232, RS485 or TTL level interface standard optional. Because of built-in MCU control system, that make the sensor output linearity get two amendments, made up the analog type precision drop because of insufficient correction led to .
This product adopts the non-contact measuring principle, can real-time output the current attitude angle, simple to use, no need to find the relative variation of the two surface for mounting. It is a ideal choice for Industrial automation control and platform measuring attitude,strong ability of resisting external electromagnet interference, can be adapted to long-term working in the industry harsh environment. This product is suitable for the static and slow changes dynamic measurement, not suitable for rapid changes dynamic measuring.
Dual-Axis Inclinometer Measuring range±0°~±90° optional
Accuracy: refer to the technical data Wide voltage input: 9~36V
Output mode: RS232/RS485/TTL Wide temperature working: -40~+85°C
IP67 protection class Highly anti-vibration performance >3500g
Resolution: 0.05° Small Volume : 55×37×24mm(customized)
Electric blind man chair leveling Cloud deck operating monitor
Satellite antenna positioning Medical equipment leveling
Car Chassis Measurement Four - wheeled positioning system
engineering mechanical measurement of dip angle
|Measure axis||X Y||X Y||X Y||X Y||Axis|
|Zero Temp. coefficient||-40～85℃||±0.02||±0.02||±0.02||±0.02||°/℃|
|Sensitivity temp. coefficient||-40～85℃||≤150||≤150||≤150||≤150||ppm/℃|
|Power on start time||0.5||0.5||0.5||0.5||S|
|Output rate||5Hz,15Hz,35Hz,50Hz, can be set|
|EMC||According to EN61000 and GBT17626|
|Insulation Resistance||≥100 MΩ|
|Shockproof||100g@11ms,3 Axial Direction (Half Sinusoid)|
|Cables||standard configuration: 1 meter wearproof,grease proofing,wide temperature,Shielded cables 4*0.3mm2|
|Weight||90g (exclude cable)|
The installation must guarantee the product bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to the following scheme.
Shenzhen RION, as a positon sensor manufacturer and solution expert, attaches much importance to products reseach and develop which spend over 20% of annual profit. We have the most R&D personnel and best technology comparing with our peer to raise our up on the high level of sensor field. And we orientate ourself to market tightly and engage ourself into providing the most considerate and professional solution and service to customers. RION introduce advanced equipment, such as TEMP&HUMI chamber, salt spray corrosion test chamber, high precision automatic turntable, high precision marble checking platform, digital thermostat drying oven, electrostatic discharge tester and 360 degree mechanical turntable etc, and set up Environmental Testing Laboratory, Product Aging Chamber, 2D&3D Posture Calibration Room and Shake&Impact Test Room for R&D and factory test.
Beside owning excellent hardware, RION also developed 15 sets of software independently and keep developing, including multi-sensor monitor software, remote sensor monitor software, synchronous dynamic l tracking 3D presentation software, tilt switch early warning and debugging software and sensor serial port setting presentation software etc which could apply to XP, Win7, Win8, WinCE and Android system. RION, owning talent and diligent personnel, advanced technology and market-orientated strategy, engages itself in offerring you the most considerate and professional solution and service of position sensor.
You satisfaction is our ultimate destiny.
Certificates & Honor
Packaging: carton with sponge
We will ship your order within 7 business days after we receive the full payment.
If you choose ship by DHL/UPS/FEDEX/TNT,it will take 3-5 work days; If you choose EMS ,it will take 5-7 work days.
One year warranty is provided, during that period, we exchange and fix the malfunction item forfree, and still we take care of products for its lifetime.
we are position sensor solution expert, full service and support before, in the middle of and after sales would be provided.
the payment by Escrow/Alipay,including Paypal,Credit Card and T/T, WU.
|Contact Person :||sean|