IP67 Mems Dual Axis Digital Inclinometer CAN2.0A High Precision For Construction
▶ PARAMETERS
SCA116&126T C2 | CONDITION | PARAMETER | UNIT | |||
Measure range | ±10 | ±30 | ±60 | ±90 | ° | |
Measure axis | X/XY | X/XY | X/XY | X/XY | Axis | |
Resolution | 0.01 | 0.01 | 0.01 | 0.01 | ° | |
Absolute accuracy | @25℃ | 0.05 | 0.05 | 0.05 | 0.08 | ° |
Long term stability | 0.05 | 0.05 | 0.05 | 0.05 | ° | |
Zero Temp. coefficient | -40~85℃ | ±0.006 | ±0.006 | ±0.006 | ±0.006 | °/℃ |
Sensitivity temp.coefficient | -40~85℃ | ≤100 | ≤100 | ≤100 | ≤100 | ppm/℃ |
Power-on start time | 0.5 | 0.5 | 0.5 | 0.5 | S | |
Response time | 0.02 | 0.02 | 0.02 | 0.02 | s | |
Output rate | 5Hz,15Hz,35Hz,50Hz can be set | |||||
Output signal | CAN2.0A | |||||
EMC | According to EN61000 and GBT17626 | |||||
MTBF | ≥50000 hours/times | |||||
Insulation Resistance | ≥100 MΩ | |||||
Impact resistance | 100g@11ms, 3 Axial Direction (Half Sinusoid) | |||||
Anti-vibration | 10grms,10~1000Hz | |||||
Protection grade | IP67 | |||||
Cables | standard configuration: 1 meter wearproof,grease proofing,wide temperature,Shielded cables 4*0.4mm2 | |||||
Weight | 140g(exclude cable) |
* This performance parameter only lists ± 10 °, ± 30 °, ± 60 °, ± 90 ° series as a reference, for other measurement ranges, please refer to the most adjacent parameters.
▶ INTRODUCTION
SCA116T & SCA126T is a CAN2.0A output single and dual axis tilt sensor for industrial field control. It adopts industry standard isolated CAN transceiver, built-in high-precision A / D differential converter, and can be measured through a 5th order filtering algorithm. The sensor outputs the tilt and pitch angle relative to the horizontal plane.
Due to the built-in high-precision digital temperature sensor of ADI, the temperature drift of the sensor can be corrected according to the change of the built-in temperature sensor to ensure the high repeatability of the product in low temperature and high temperature environments. The output response frequency standard can be up to 100Hz. If a higher response frequency is required, our company can customize it according to the user. The product belongs to a real industrial grade product, with reliable and stable performance, good scalability, and multiple output options. Suitable for various harsh industrial control environments.
▶ FEATURES
★ Single and biaxial inclination measurement ★ Range ± 1 ~ ± 90 ° optional
★ DC 9~36V wide voltage input ★ Accuracy: 0.05 °
★ Wide temperature operation -40 ~ + 85 ℃ ★ Resolution 0.01 °
★ High anti-vibration performance> 2000g ★ Direct lead interface
★ Size: L90 × W40 × H26mm ★ Output method: CAN2.0A
▶ APPLICATION
★ Engineering vehicles automatic leveling ★ Bridge & dam detection
★ Aerial platform vehicle, lifter safety & protection ★ Medical facilities angle control ★ Underground drill posture navigation ★ Shield pipe jacking application ★ Based on the angle direction measurement ★ Geological equipment inclined monitoring
★ Mining machinery, oil-well drilling equipment ★ Equipment level control
★ Alignment control, curve control
★ Directional satellite communications antenna pitching angle measurement
▶ ELECTRONIC CHARACTERISTICS
PARAMETERS | CONDITION | MIN | TYPICAL | MAX | UNIT |
Power supply voltage | standard | 9 | 12,24 | 36 | V |
customizable | 5 | V | |||
Working current | No load | 40 | mA | ||
Working temp. | -40 | +85 | ℃ | ||
Store temp. | -40 | +85 | ℃ |