China Shenzhen Rion Technology Co., Ltd. Company Cases

The structure of a bridge generally includes six parts: span structure, piers and abutments, foundation, superstructure, bearings, and conical slope protection. Piers are buildings that support the span structure and transmit live loads such as dead loads and vehicles to the foundation. Many bridge piers are manufactured by specialized manufacturers and transported to the site for construction. This method is called on-site construction method, which involves measuring and setting out, recording values, checking the size of the cup mouth, roughening the contact surface between the cup mouth and the prefabricated bridge pier column, and using ink lines to mark the centerline and elevation control lines on the side of the prefabricated pier column to control its position when in place. Before installing the pier column, it is necessary to measure and inspect the dimensions of each part of the bridge pier column to ensure that the elevation of the column top meets the design requirements after the installation of the pier column. During on-site lifting, use a crane to align the pier column with the axis position and vertically lower it into the cup mouth. During lifting, manual cooperation should be used to slow down the falling speed, and wooden boards or rubber pads should be placed on vulnerable areas. The position should be corrected by hanging lines on both sides. After accurate positioning, fix each side of the pier column tightly and ensure that the column is stable before removing the hook. During the process of placing the bridge pier columns in the designated position with a crane, there may be swinging of the bridge pier columns and tilting of the bottom of the bridge pier columns, especially when calibrating the position. This requires the crane operator to have high crane operation skills and rich experience, otherwise it may cause local damage to the bridge pier columns due to improper operation. So many bridge research institutes conducted research on this issue and finally concluded that using inclination sensors can solve this problem. Simply fixing the inclination sensor on the top of the bridge pier column allows for real-time and clear understanding of the accurate inclination angle of the bridge pier during the lifting process. This provides crane operators with accurate basic posture of the bridge pier, making it easier for operators to operate, thereby improving the accuracy and safety of pier lifting. It has now become an indispensable part of bridge construction. Shenzhen Rion Technology Co., Ltd. is located in Shenzhen, a magical land full of charm. It is a high-tech enterprise focusing on the research, development, manufacturing, sales and System integration of tilt angle, compass and other products. The company is engaged in sensor based market services and technical work with the basic business philosophy of specialization and marketization, , the technical development of sensor supporting solutions, and the provision of professional development and testing solutions according to customer needs. To ensure the effectiveness, standardization and process of our products and technical services, and ensure maximum customer satisfaction. We strictly adhere to the IATF16949 quality assurance system to achieve strict internal management procedures and flexible optimization of service levels for customers. The company's main business products include inclination sensors, digital inclinometers, inclinometers, three-dimensional electronic compasses, acceleration sensors, and many other well-known foreign brands of industrial grade products. These products are widely used in fields such as automobiles, ships, airplanes, machinery, metallurgy, electricity, textiles, railways, dam monitoring, medical equipment, oil drilling, coal mining, marine surveying, high-precision surveying, and have become excellent partners for many internationally renowned brand companies in China.

The importance of monitoring the rolling quality of road rollers With the development of information technology, informatization and digitization have gradually penetrated the entire lifecycle of engineering construction and operation. In recent years, the rapid development of Internet of Things technology and Mobile technology has once again promoted the new application of high-precision measurement, positioning technology and intelligent technology in construction process control. These innovative products provide scientific and effective means to control the quality of the construction process, improve work efficiency, and ensure construction safety. Rolling compaction construction is one of the main construction measures commonly used in infrastructure projects such as hydropower stations, airports, high-speed railways, and transportation, including soil and stone compaction construction, concrete compaction construction, etc. Compaction is the core indicator for evaluating the quality and results of rolling construction, while the thickness of the rolling layer, the number of rolling passes, and the frequency of vibration are the key control indicators for the quality control of the rolling construction process. For a long time, traditional quality monitoring methods have adopted the method of "manually measuring the thickness of the rolling layer, recording the number of rolling passes, and organizing sampling testing for compaction degree after rolling is completed", which not only has low work efficiency but also cannot comprehensively evaluate the rolling quality. In recent years, digital products and solutions for rolling monitoring based on GPS and related sensing technology have gradually emerged, but the cost is high and Chinese enterprises do not have independent intellectual property rights in core technologies. The Application of Rion Accelerometer in the Monitoring and Analysis System of Rolling Quality The Rion Technology accelerometer monitors the roller in the real-time monitoring and analysis system for rolling quality. It uses the vibration frequency and amplitude of the accelerometer to monitor the roller's rolling construction speed, speed, and excitation force in real time, whether it vibrates according to the requirements, whether the vibration meets the design requirements, and can also calculate the excitation force of the roller at that time through the amplitude and frequency. The vibration frequency is the number of vibrations within a period of time, and the vibration amplitude is the maximum acceleration per unit time. The sensor is installed on the roller of the press, uploading data in real-time, providing construction guidance and abnormal warning of rolling speed, layer thickness exceeding standards, and assisting the driver in driving and control. Application picture of Rion accelerometer in rolling quality monitoring

After the invention of electricity, it gradually became an essential component of people's production and life. Due to the vast territory of China, the transmission of electricity has been greatly affected. Most transmission line towers are installed in the field. Although the foundation is solid, from the perspective of safety, due to the long-term impact of Diastrophism, weather environment, artificial construction (such as field blasting in the case of highway construction), the tower is prone to tilt, especially in winter, covered by ice and snow, and affected by both freezing and gravity, It is more likely to cause the iron tower to tilt and deform due to stress changes, leading to various unpredictable serious consequences such as transmission line breakage and tower collapse. This not only poses numerous obstacles to emergency repair, but may even endanger people's life safety. For the early prediction of tower tilt, the current method used is for line patrol personnel to carry bulky instruments and equipment to the vicinity of the tower, and then deploy the equipment for measurement. This is not only inefficient, but also inaccurate and timely, and cannot fundamentally solve the early prediction of tower tilt, timely eliminate safety hazards, and ensure the normal operation of power transmission. The inclination sensor designed and produced by Shenzhen Rion Technology Co., Ltd. can detect the inclination angle of the iron tower caused by various external factors by simply installing it on the tower, facilitating real-time monitoring, statistics, and analysis by relevant personnel. It can set an angle alarm value, and when the tower tilt angle value reaches the set alarm value, it will automatically alarm, reminding the detection personnel to do safety protection work in advance. Shenzhen Rion Technology Co., Ltd. is located in Shenzhen, a magical land full of charm. It is a high-tech enterprise focusing on the research, development, manufacturing, sales and System integration of tilt angle, compass and other products. The company is engaged in sensor based market services and technical work with the basic business philosophy of specialization and marketization,the technical development of sensor supporting solutions, and the provision of professional development and testing solutions according to customer needs. To ensure the effectiveness, standardization and process of our products and technical services, and ensure maximum customer satisfaction. We strictly adhere to the ISO9000 quality assurance system to achieve strict internal management procedures and flexible optimization of service levels for customers. The company's main business products include inclination sensors, digital inclinometers, inclinometers, three-dimensional electronic compasses, acceleration sensors, and many other well-known foreign brands of industrial grade products. These products are widely used in fields such as automobiles, ships, airplanes, machinery, metallurgy, electricity, textiles, railways, dam monitoring, medical equipment, oil drilling, coal mining, marine surveying, high-precision surveying, and have become excellent partners for many internationally renowned brand companies in China. We win the support and trust of users and society with our professional service level and strong technical strength, coupled with a reliable quality system guarantee and a comprehensive service system. Continuously dedicating the latest cutting-edge high-tech products to users and tailoring comprehensive professional application solutions for you.

In 2007, in areas such as Jiangxi, Hunan, Hubei, Guizhou, and Anhui, the sudden snow disaster directly caused various economic losses of several billion yuan. What was even more headache was that the snow disaster caused widespread power outages in large areas. This was not because power companies stopped supplying electricity, but because many power grid towers were crushed by the blizzard, causing damage to the power grid. In a winter without electricity, It is conceivable that daily life and work bring great inconvenience. After investigation, it has been found that the collapse of power poles on such a large scale is due to the fact that they have been working in various complex external environments for a long time, and once a malfunction occurs, the specific problem cannot be detected immediately. If the work is done manually, it will require a lot of manpower, material resources, financial resources, and efficiency is also very low. To this end, the Ministry of National Security attaches great importance and solicits various convenient, fast, safe, and reliable solutions that can be used in harsh environments and maintain stable performance at all costs. Ultimately, Shenzhen Rion Technology Co., Ltd., in conjunction with a national power research institute, jointly developed a set of unreasonable solutions, which is to use tilt sensors for real-time online monitoring. With over a decade of research and development and production in the inclination sensor industry, the inclination sensor designed and produced by Shenzhen Rion Technology Co., Ltd. can be well applied in this monitoring system. The system measures the inclination of the tower pole by measuring the inclination angle of the dual axis inclination sensor installed on the tower pole, thereby detecting whether the tower pole is severely tilted and causing tipping. Shenzhen Rion Technology Co., Ltd. is located in Shenzhen, a magical land full of charm. It is a high-tech enterprise focusing on the research, development, manufacturing, sales and System integration of tilt angle, compass and other products. The company is engaged in sensor based market services and technical work with the basic business philosophy of specialization and marketization, the technical development of sensor supporting solutions, and the provision of professional development and testing solutions according to customer needs. To ensure the effectiveness, standardization and process of our products and technical services, and ensure maximum customer satisfaction. We strictly adhere to the ISO9000 quality assurance system to achieve strict internal management procedures and flexible optimization of service levels for customers.

With the decreasing storage capacity of conventional energy and increasingly severe environmental pollution, the search and development of 'environmentally friendly new energy' has become an important theme worldwide. Solar energy is an emerging renewable energy source that is abundant in resources, can be used for free, and does not require transportation. It also has no environmental pollution and is an ideal energy source. The solar energy industry is currently one of the new energy industries that China strongly supports and develops. Based on the actual market demand and proposals from multiple solar automatic tracking system manufacturers, coupled with years of continuous improvement in autonomous tilt sensor technology by Ruifen Technology, we are now grandly launching the application of tilt sensors developed and produced by Ruifen Technology in solar automatic tracking systems. The automatic sun tracking mode of "ephemeris calculation+GPS positioning+inclination sensor measurement" has high tracking accuracy, simple and convenient installation and use, accurate and reliable data, and is not affected by seasonal change/climate change/harsh environment. It can accurately track the sun anytime and anywhere, and the power generation efficiency can be increased by 40%.

the maximum measuring range is± 3 °, high resolution 0.0005 °, can completely replace the traditional high-precision level meter. Digital signal transmission, matched with professional computer software, data measure and record correctly,output interface RS485, RS232, TTL, PWM or CAN 2.0B optional.Non-contact installation features make ACA826Twithsuperior system integration, convenient installation only need fix the sensor on the measured surface by screws , then can automatically calculate the object horizontal inclined angle, easy to use .With strong ability resistance to external electromagnetic interference and to withstand shock and vibration,in the domestic counterparts products with absolute competitive advantage.