IMU16488 Inertial Measurement Unit Triaxial Magnetometer and Pressure Sensor Included
Datasheet download please click here below ,
★ 0.01% Nonlinearity
★ 2000g Shock Survivability
★ 6°/Hr In-Run Bias Stability
★ Single-Command Self-Test
★ Fast Start-Up Time, ~500 Ms
★ 0.3°/√Hr Angular Random Walk
★ Alarms For Condition Monitoring
★ SPI-Compatible Serial Interface
★ Digital I/O: Data-Ready Alarm Indicator, External Clock
★ Embedded Temperature Sensor
★ Optional External Sample Clock Input : Up To 2.4 Khz
★ <±0.05° Orthogonal Alignment Error
★ Power-Down/Sleep Mode For Power Management
★ Single-Supply Operation: 3.0 V ~ 3.6 V
★ Calibration Temperature Range: −40°C ~ +70°C
★ Automatic And Manual Bias Correction Controls
★ Triaxial, Digital Accelerometer, ±18 g
★ Digital Pressure Sensor, 300 Mbar To 1100 Mbar
★ Triaxial, Digital Magnetometer, ±2.5 Gauss
★ Triaxial, Delta Angle And Delta Velocity Outputse
★ Triaxial, Digital Gyroscope, ±450°/Sec Dynamic Rang
▶ APPLICATION
Platform stabilization and control
Navigation
Personnel tracking
Instrumentation
Robotics
The IMU16488 Device Includes a Triaxis Gyroscope, a Triaxis Accelerometer, Triaxis Magnetometer, And Pressure Sensor. Each Inertial Sensor In The 16488 Combines Industry-Leading Technology With Signal Conditioning That Optimizes Dynamic Performance. The Factory Calibration Characterizes Each Sensor For Sensitivity, Bias, Alignment, And Linear Acceleration (Gyroscope Bias). As a Result, Each Sensor Has Its Own Dynamic Compensation Formulas That Provide Accurate Sensor Measurements.
The 16488 Provides a Simple, Cost-Effective Method For Integrating Accurate, Multiaxis Inertial Sensing Into Industrial Systems, Especially When Compared With The Complexity And Investment Associated Inertial Frame Alignment In Navigation Systems. The SPI And Register Structure Provide a Simple Interface For Data Collection And Configuration Control.
The 16488 Uses The Same Footprint And Connector System As The 16375, Which Greatly Simplifies The Upgrade Process. It Comes In a Module That Is Approximately 47 Mm × 44 Mm × 14 Mm And Has a Standard Connector Interface.